SMTCL English English SMTCL Español Español SMTCL Русский Русский Français Português العربية Deutsch Türkçe
SMTCL Convertional Lathe
  • Home
  • Products
  • About SMTCL
  • SMTCL Images
  • Contact us
  • Exhibition Information
  • GMC Gantry Type 5-face Milling and Boring Machining Center
  • CAK Series Flat Bed CNC Lathe
  • HMC Horizontal Machining Center
  • FBC Floor Type Milling and Boring Machining Center
  • GTM Gantry Type Turning and Milling Center
    1. Products
    2. CA Series Conventional Lathe
    3. CAK Series Flat Bed CNC Lathe
    4. CW Series Conventional Lathe
    5. CW6263/80/93/110
    6. CW61100B/125B/160/200
    7. S1-170B
    8. FBC Floor Type Milling and Boring Machining Center
    9. GDC Gantry Type CNC Milling and Drilling Machine
    10. GMB Gantry Type Milling and Boring Machining Center
    11. GMC Gantry Type 5-face Milling and Boring Machining Center
    12. GTC Gantry Type Turning Center
    13. GTM Gantry Type Turning and Milling Center
    14. HMC Horizontal Machining Center
    15. HTC Large Flat Bed CNC Lathe
    16. Slant Bed CNC Lathe
    17. Slant Bed Horizontal Turning Center
    18. PBC Planer Type Milling and Boring Machining Center
    19. TPX Horizontal Boring and Milling Machine
    20. VMC Vertical Machining Center
    21. VTC Vertical CNC Lathe
    22. Pipe Threading Lathe
    23. Radial Drilling Machine
Contact us
Home » Products

Conventional Lathe


CW Series
    1. CW6263/80/93/110 Conventional Lathe This kind of machine tool is capable of achieving working accuracy at IT6-IT7 with minor surface roughness.
      The saddle bed lathe is improved on the basis of the original lathe bed. Therefore, it has all the design features and applications which the original lathe possess. The lathe ...
    1. CW61100B/125B/160/200 Conventional Lathe Conventional lathe of this series is widely used to manufacture heavy parts such as electric machine rotors and gas turbine rotors, as well as rollers in the industries of energy, power, and mining.
      This kind of machine tool is suitable for heavy cutting. It is applicable to turning end ...
    1. S1-170B Conventional Lathe SMTCL conventional lathe is ideal for semifinish and finish machining of inner circle, excircle, and plane.
      This kind of machine tool is also suitable for processing cone by power feed.
      The main shaft adopts three point support and the front end is anti-friction bearing ...

CW Series Conventional Lathe

Applications of CW Series Conventional Lathe:
Conventional lathe of CW series is widely used to perform all kinds of lathe-turning operations, such as internal or external cylindrical surfaces, conical surfaces, surfaces of revolution, and end surfaces as well as metric thread, inch screw thread, modulus and diametrical pitch thread.
This kind of machine tool is also suitable for broaching oil grooves, key grooves, and processing metallic materials (such as cast iron, steel), and non-ferrous materials.
With high power, great rigidity, and wide range of spindle speed, the conventional lathe is especially applicable to heavy cutting.
It is fit for heavy part manufacturing of electric machine rotors, gas turbine rotors, and rollers in the industries of energy, power, and mining.
This lathe is widely used in automobile, petrochemical, military, railway, and machine manufacturing industries.

Introduction of CW Series Conventional Lathe:
For the bed of this series, its double finning plate and inner finning plate on sidewall in width are designed for a composite structure between box type and diagonal bar, making the integral rigidity increase by one third; the slide carriage adopts a quick travel mechanism, which can be operated visually with a monolever; to transform the main shaft direction of rotation or to brake is under hydraulic control; the lathes have higher structural rigidity and driving rigidity, with steady precise and heavy cutting; the tailstock equips a scale dial and scale mark; the headstock are forcedly lubricated with pressure oil; and the cooling fits are handsome on the safe side with hydroelectric separation.
Hand brake or foot brake of easy and flexible operation is available for this lathe; the lathe beds of CW80 are in a massive structure with 600mm span of lathe bed guide rail; the whole lathe bed of CW63 is in basic size of 4m and over 4m, and it is available in size below 4m.
The lathes can achieve working accuracy at IT6-IT7 with minor surface roughness.
The saddle bed lathe is built on the basis of the original lathe bed, with increased diameter of gyration; therefore, it is suitable for flat and unusual part manufacturing and offers the design features and application of the original lathe.
The safety mechanism is installed in the lathe slide carriage to avoid the lathe being damaged by overloading. The upper turret is used for turning short cone workpiece, and the long cone workpiece is turned by the compound motion of longitudinal feed and lower turret feed. The lathe operating handles are assembled for easy and flexible use. The main shaft braking and changeover between forward direction and reversal are under hydraulic control. To change in speed at 1 level is available by use of the press button without shut down.

Technical Specifications of CW Series Conventional Lathe:

Name Specification CW6163B CW6263B CW6180B CW6280B CW6193B CW61110B
3-Jaw chuck Ø315 ● ● ● ● ● ●
Follow rest Ø20-130 ● ●
Ø30-130 ● ●
Ø30-180 ● ●
Ø50-220 * *
Ø200-310 * *
Steady rest Ø20-170 ● ● * *
Ø40-350 ● ●
Ø30-420 ●
Ø40-460 ●
Face plate Ø650 ● *
Ø800 * ● * *
Ø930 ● *
Ø1120 ●
Ø1600
Center and Center sleeve Metric120; Morse5 ● ● ● ● ● ●
Metric120; Morse6
Live center Morse6
Metric80; Morse6
Cooling device and illuminating equipment ● ● ● ● ● ●
Tools ● ● ● ● ● ●
3-Jaw chuck Ø380 * * * * * *
Ø400 * * * * * *
Ø500 * * * * * *
4-Jaw chuck Ø400 * * * * * *
Ø500 * * * * * *
Ø630 * * * * * *
Ø800 * *
Ø1000 *
Steady rest Ø160-350 * *
Ø130-480 * *
Ø100-450 * *
Ø150-500 * *
Ø300-640 * *
Taper attachment and thread cutting dial L=500 * * * * * *
Digital Display unit * * * * * *
Adjustable pads * * * * * *

●Standard accessories ★ Optional accessories
Note: The lathes CW6263B and CW6263B/750mm/1500mm are not accompanied with optional accessories for a follow rest or center rest. It is equipped with two center rests when maximum turning diameter of the lathe is ≥1000mm, and length between 8000mm-10000mm; and it may be equipped with a blocking iron when maximum turning diameter of the lathe is ≥1000mm, and length not less than 8000mm.

Item Units CW6163B/C CW6263B/C CW6193B/C CW6293B/C CW6180B/C CW6280B/C CW61110B/C CW62110B/C
Max. swing diameter overbed mm 630 930 800 1110
Max. swing diameter over carriage mm 350 650 480 800
Max. workpiece length mm 750, 1500 3000-8000 1500 3000-8000 1500, 3000, 4000, 5000-14000
Max. swing dimeter and width in gap mm 800/300 1100/300 1000/310 1300/310
Spindle bore and nose Ø104; D11(B series) Ø130; D11(C series)
Taper in spindle nose and center Ø120 (B series) Ø140 (C series) Mores 5
Range of spindle speed r/min 8 kinds 7.5-1000(B series) 18 kinds 8.5-800(C series) 18 kinds 6-800(B series) 18 kinds 8.5-800(C series) 18 kinds 5.4-720 18 kinds 4.8-640
Range of longitudinal feed mm/r 64 kinds 0.05-24.3 64 kinds 0.05-24.3 64 kinds 0.06-24.3 64 kinds 0.05-24.3
Range 1:1 mm/r 0.1-1.52
Range 16:1 mm/r 1.6-24.3
Micro feed scope of shift gear mm/r
Longitudinal and cross feed rate 1/2
Rapid traverse of carriage mm/min 4000
Lead screw pitch 12( Metric); 1/2"
Number, range of Metric thread mm 50 kinds;1-240
Number, range of inch thread t.p.i 26kinds;14-1
Number, range of module thread mm 53 kinds;0.5-120
Number, range of diametral thread DP 24 kinds;28-1
Max. cross travel of lower slide mm 315 500 500 500
Max. travel of top slide mm 200 200 200 200
Max. travel of quill of tailstock mm 250 250 250 250
Taper of quill of tailstock Morse No.5 Morse No.5 Morse No.5 Morse No.5
Hardness of bed guideways mm 550 RC52 550 RC52 600 RC52 600 RC52
Power of main motor kW 11 11 11or15 11or15
Rapid motor power kW 1.1 1.1 1.1 1.1
Cooling pump power W 120 120 120 120
Machine W×H / Packing W×H mm 1380×1450/1780×1890 1440×1835/1700×2100 1550×1630/
1880×1910
1560×1900/
1800×2520
Machine length /Packing dimension Max. workpiece length 750 mm 2890/3440
1500 mm 3690/4240 3690/3900 3700/4150 3700/3900
2000 mm 4070/4620
3000 mm 5190/5740 5190/5400 5250/5650 5250/5400
4000 mm 6120/6640 6100/6350 6250/6650 6250/6450
5000 mm 7200/7750 7200/7430 7250/8050 7250/7630
Machine weight (Net/Gross) Max. workpiece length 750 mm 3400/4400
1500 mm 3700/4700 4200/4950 4900/6000 5500/6350
2000 mm 4200
3000 mm 4700/5900 5200/6250 5500/6900 6100/7250
4000 mm 5800/7700 6300/7500 6100/8000 6700/8150
5000 mm 6800/8800 7300/8700 6900/9000 7500/9200
Max. weight of workpiece kg 2000 2000 2000 2000
Item Units CW61100B/CW61125B CW61100B/125B/160/200 CW61200/CW62200 S1-170B
Max. swing diameter over bed mm 1000/1250 1600 2000 1400
Max. workpiece length mm 1500/3000/5000-15000 3000/5000/6000-16000 3000/5000/6000-16000 1500
Max. swing diameter over carriage mm 610/865 1200 1580/2500 800
Max. swing diameter over gap mm 1600
Gap length mm 440
Diameter of spindle bore mm 130 130 130 104
Taper of spindle nose Metric 140 Metric 140 Metric 140 Metric 140
Type of spindle speed Forward 21kinds 21 kinds 21 kinds 21 kinds
Type of spindle speed Reverse 12 kinds 12 kinds 12 kinds 12 kinds
Range of spindle speeds
n1★Forward r/min 3.15-315 2-200 2-200 2-200
Reverse r/min 3.5-278 2.24-178 2.24-178 2.24-178
n2Forward r/min 2-200
Reverse r/min 2.24-178
Range of feed 56 kinds 56 kinds 56 kinds 56 kinds
Longitudinal mm 0.1-12 0.1-12 0.1-12 0.06-7.2
Cross mm 0.05-6 0.05-6 0.05-6 0.03-3.6
Upper turret mm 0.025-3 0.025-3 0.025-3 0.015-1.8
Number, range of metric thread mm 44 kinds 1-120 44 kinds 1-120 44 kinds 1-120
Number, range of inch thread 31 kinds 24-1/4t.p.i 31 kinds 24-1/4t.p.i 31 kinds 24-1/4t.p.i
Number, range of module thread mm 45 kinds 0.5-60 45 kinds 0.5-60 45 kinds 0.5-60
Number, range of diametral thread 38 kinds 1/2-56DP 38 kinds 1/2-56DP 38 kinds 1/2-56DP
Max. travel of gap mm 1450/2950/4950-14950 2800/4800/5800-15800 2800/4800/5800-15800 1500
Max. cross travel of lower turret mm 520/630 960 1010 980
Max. travel of middle turret mm 300 300 300
Max. travel of upper turret mm 300 200 200 200
Rapid traverse of turret cross mm/min 3740 3740 3740 3740
longitudinal mm/min 1870 1870 1870 1870
Middle turret mm/min 935 935 935 935
Quill of tailstock diameter mm 160 180 180
Max. travel of quill of tailstock mm 300 300 300
Taper of quill of tailstock Morse No.6 Metric 80 Metric 80
Power of main motor kW 22 22 22 22
Dimension length mm 4600/6100/8100-18100 6400/8400/9400-194000 6400/8400/9400-194000 4287
width mm 2150 2320 2410 2370
heighth mm 1700/1825 2600 2770 2030
Width of guideways mm 755 1100 1100 1100
Max. torque KN.m 44 44 44
Max. weight loaded kg 6000 8000 8000 1500

Standard number of revolution
Note: Spindle's standard number of revolution is 2-200 r/s for a lathe 10000 mm over, and two turrets are assembled if a center distance is longer than 11000mm

Lathes of SMTCL (China conventional lathe builder) are very popular among global markets, such as America, Canada, Britain, India, just to name a few.

CW Series Conventional Lathe

Home » Products » CW Series Conventional Lathe
Sitemap| CA Series Conventional Lathe| CAK Series Flat Bed CNC Lathe| CW Series Conventional Lathe| FBC Floor Type Milling and Boring Machining Center
International Marketing