VMC Vertical Machining Center

Introduction of Vertical Machining Center:
This vertical machining center perfectly combines traditional C-frame style construction and ultra rigid bridge type construction. The adoption of the quality guideways, ballscrews and bearings ensures the super machining efficiency of the machine.

Features of Vertical Machining Center:
X, Y and Z axis are all with linear guide ways on small and middle model (VMC1000 under, include VMC1000), realizing rapid feed speed. X, Y axis are with linear guide ways, Z axis is with sliding boxway on big model (VMC1100 above, include VMC1100), insuring the rigidity of the machine.
Due to the adoption of imported linear guide way, rapid travel, good positioning accuracy and longer-duration life are achieved. VMC1300 and VMC1600 machines are with 4 guide ways design on Y axis to solve distortion problem at extended position of table and improve the machine rigidity.
All motion couples such as ball screw, guide way, ball screw and bearings are centralized lubricated with constant rating dispenser and protection interlock of low oil for adequate lubrication.
Thanks to the special design, the overflow oil can flow back to collecting tank at the back of the machine, which avoids the mixing of the oil and coolant.
The guide way and ball screw of Y axis have separate stainless steel way cover for outstanding chip removing effect.
The machine can be easily lifted or transported by crane or forklift.
The standard tool magazine is cost-effective umbrella type. Optional arm type tool magazine is available for less tool change time.
Optional accessories: coolant system, 4th axis rotary table, tool probe parts measuring device etc.

Technical Specifications of VMC Vertical Machining Center:

Item			Units	TC300	TC500	TC700	VMC650E	VMC850E	VMC700
Worktable	Table size		mm	650 ×330	650 ×400	850 ×410	900 ×420	1000 ×500	800×420
	Max. load capacity		kg	150	250	250	500	600	300
	T-slot dimention		mm×N	14×3	14×3	14×3	18×3	18×5	18×3
Machining range	Max. travel of table (X axis)		mm	300	500	700	650	850	700
	Max. travel of carriage (Y axis)		mm	300	400	400	400	500	420
	Max. travel of headstock (Z axis)		mm	300	300	300	500	540	510
	Distance of spindle nose to table surface		mm	250- 550	250- 550	250- 550	130- 630	150- 690	130-640
Spindle	Spindle taper (7:24)			BT30	BT30	BT30	BT40	BT40
	Spindle speed range		r/min	50-12000	50-12000	50-12000	50-8000	50-8000
	Max. spindle torque		N.m	23.5	23.5	23.5	26.3	35.8	47.7
	Spindle motor power		kW	3.7	3.7	3.7	5.5/7.5	7.5/11	7.5/11
	Distance from spindle center to column guideway surface		mm	388	388	388	530	580	529
	Spindle drive			Direct coupled	Direct coupled	Direct coupled	Belt trans mission	Belt trans mission	Direct coupled	Belt trans mis sion
Tool	Shank specification			MAS403: BT30	MAS403: BT30	MAS403: BT30	MAS403 :BT40		MAS403: BT30	MAS 403: BT40
	Pull stud specification			MAS403:LDA-BT30			MAS403: LDA-BT40		MAS403: LDA-BT30	MAS 403: LDA- BT40
Feed	Feed speed		mm/min	1-30000	1-30000	1-30000	1-10000	1-10000	1-10000
	Rapid travel	X-axis	m/min	36	36	36	24	24	48
		Y-axis	m/min	36	36	36	24	24	48
		Z-axis	m/min	36	36	36	20	18	48
Tool magazine	Tool magazine type			Turret formula	Turret formula	Turret formula	Hat	Hat	Disk
	Capacity		piece	14	14	14	16	16	16
	Max. tool length		mm	250	250	250	200	250	200	300
	Max. tool weight		kg	2.5	2.5	2.5	7	7	5	7
	Tool changing time (tool to tool)		s	1.8	1.8	1.8	7	7	1.2	2.8
	Diameter of maximum tool	Full	mm	Ø80	Ø80	Ø80	Ø80	Ø80	Ø80
		Adj acent pocket empty	mm	Ø120	Ø120	Ø120	Ø125	Ø125	Ø125
Overall dimensions	L×W×H		mm	2150 ×1050 ×2900	2150 ×1650 ×2900	2150 ×2100 ×2900	2600 ×2100 ×2400	3150 ×2600 ×2800	2400×2050 ×3000
	Machine weight		kg	1900	2000	2200	4500	5200	4000
CNC Control				MITSUBISHI E68	MITSUBISHI E68	MITSUBISHI E68	FANUC 0i MATE	FANUC 0iM ATE	FANUC 0i MC

Item			VMC850	VMC1000	VMC1100		VMC1300	VMC1600(L)	VMC2180	VMC21100
Worktable	Table size		1000 ×500	1200 ×500	1300 ×610		1400 ×700	1700 ×800 (2100 ×800)	1950 ×800 (2110 ×940)	2200 ×1000 (2400 ×1070)
	Max. load capacity		500	500	1000		1000	2000	3000	3000
	T-slot dimention		18×5	18×5	18×5		18×5	22×5	22×5	22×5
Machining range	Max. travel of table (X axis)		850	1000	1100		1300	1600	2100	2100
	Max. travel of carriage (Y axis)		510	510	610		700	800	800	800
	Max. travel of headstock (Z axis)		540	540	610		700	800	850	850
	Distance of spindle nose to table surface		150-690	150-690	150- 760		140-840	200-1000	200-1050	200->1050
Spindle	Spindle taper (7:24)		BT40	BT40	BT40	BT50	BT50	BT50	BT50	BT50
	Spindlespeed range		50- 8000	50- 8000	50- 7000	50- 6000	50- 6000	50- 6000	20- 4500	20- 4500
	Max. spindle torque		47.7	47.7	70	95.4	95.4	95.4	381	381
	Spindle motor power		7.5/11	7.5/11	11月15日	15/18.5	15/18.5	15/18.5	15/18.5	15/18.5
	Distance from spindle center to column guideway surface		600	600	725		820	940	1040	1040
	Spindle drive		Belt trans mission	Belt trans mission	Belt trans mission		Belt trans mission	Belt trans mission	Gear	Gear
Tool	Shank specification		MAS 403: BT40	MAS 403: BT40	MAS 403: BT40	MAS 403: BT50	MAS 403: BT50	MAS 403: BT50	MAS 403: BT50	MAS 403: BT50
	Pull stud specification		MAS 403: LDA -BT40	MAS 403: LDA -BT40	MAS 403: LDA -BT40	MAS 403: LDA -BT50	MAS 403: LDA -BT50	MAS 403: LDA -BT50	MAS 403: LDA -BT50	MAS 403: LDA -BT50
Feed	Feed speed		1-10000	1-10000	1-10000		1-10000	1-10000	1-4000	1-4000
	Rapid travel	X-axis	36	36	24		24	18	10	10
		Y-axis	36	36	24		24	18	10	10
		Z-axis	36	36	18		18	15	7	7
Tool magazine	Tool magazine type		Disk	Disk	Disk		Disk	Disk	Chain type	Chain type
	Capacity		24	24	24	20	20	20	32	32
	Max. tool length		300	300	300		300	300	350	350
	Max. tool weight		7	7	7	15	15	15	15	15
	Tool changing time (tool to tool)		3.5	3.5	3.5		3.5	3.5	3.5	3.5
	Diameter of maximum tool	Full	Ø80	Ø80	Ø80	Ø133	Ø133	Ø133	Ø125	Ø125
		Adj acent pocket empty	Ø150	Ø150	Ø150	Ø250	Ø250	Ø250	Ø190	Ø190
Overall dimensions	L×W×H		2840 ×2565 ×2944	2840 ×2565 ×2944	2944 ×3225 ×3361		3600 ×3310 ×3550	4300 ×3600 ×3800	7075 ×4745 ×4372	7075 ×4745 ×4372
	Machine weight		7300	7350	9500		12000	14000	24550	25500
CNC Control			FANUC 0i MC	FANUC 0i MC	FANUC 0i MC		FANUC 0i MC	FANUC 0i MC	FANUC 0i MC	FANUC 0i MC

Founded in 1995, SMTCL, a China vertical machining center manufacturer, has provided a wide line of machine tools to meet the precision machining requirements of global customers.
VMC Vertical Machining Center