TPX Horizontal Boring and Milling Machine
Model: TPX6111B, TPX6111B2

Introduction of TPX6111B Horizontal Boring and Milling Machine:
The table-type horizontal boring and milling machine TPX6111B is an indispensable equipment for performing complex machining operations on housing parts.
It is used increasingly for drilling, under-reaming, boring, reaming, milling, counter-boring and threading etc.
The spindle, with optional taper hole of ISO7:24No50, can adopt automatic tool clamping/unclamping device.
The optional rear column allows the machining of holes with special alignment requirement to achieve a higher degree of precision.

Introduction of TPX6111B2 Horizontal Boring and Milling Machine:
The table-type horizontal boring and milling machine TPX6111B is complemented with integral auxiliary guide-way.
The traverse travel of table is on the lower slide.
Thanks to its high rigidity and little distortion, the machine features enhanced machining precision.
Automatic tool clamping/unclamping device is available for the spindle (with optional taper hole of ISO7:24No50).
The rear column is optional.

Technical Specifications of Horizontal Boring and Milling Machine:

		Units	TPX6111B	TPX6111B/2
Spindle	Spindle diameter	mm	110	110
	Spindle taper	—	Morse No6 (ISO7:24No50)	Morse No6 (ISO7:24No50)
	Max. spindle torque	N.m	1225	1225
	Max. spindle thrust	N	12250	12250
	Steps of spindle speed	—	22	22
	Range of spindle speed	r/min	8-1000	8-1000
	Power of main motor	kW	7.5	7.5
Facing head	Max. facing head torque	N.m	1960	1960
	Facing head diameter	mm	630	630
	Range of facing head speed	r/min	4-200	4-200
	Steps of facing head speed	—	18	18
Table	Table working surface (L×W)	mm	1100×960	1100×960
	Max. permissible load on table	kg	2500	2500
	T-slot	mm	22	22
	Number of T-slot	—	10	10
Working range	X-axis travel	mm	900	1250
	Y-axis travel	mm	900	900
	Z-axis travel	mm	1400 (rear column 1000)	1400 (rear column 1000)
	W-axis travel (Spindle travel)	mm	600	600
	U-axis travel (Facing slide travel)	mm	180	180
	B-axis worktable rotary	°	360	360
	Distance between spindle axis and table surface	mm	0	0
Feed range of revolution	Rapid travel (X/Y/Z/W)	mm/min	2500	2500
	Range of axes speed per spindle revolution (X/Y/Z/W/U)	mm/rev	0.04-6/0.01-1.88	0.04-6/0.01-1.88
	Feed range (X/Y/Z/W/U)	mm/min	—	—
Precision	Measurement system reading precision (X/Y/Z)(Z-axes measurement optional)	mm	0.005	0.005
	B-axis measurement system reading precision (B-axis measurement optional)	°	0.001	0.001
General parameter items	Overall dimensions (L×W×H)	mm	4910×2454×2750	4910×2870×2750
	Weight of machine	kg	13000	14500

SMTCL is a premier boring and milling machine manufacturer. Our success begins with our ability to apply state-of-the-art technology in combination with endless customer needs.