PBC Planer Type Milling and Boring Machining Center

PBC Planer Type Milling and Boring Machining Center

Applications:
PBC series milling and boring machine is mainly applicable to boring and milling.
It is also suitable for drilling, boring, taping, turning outside diameter and turning surface, especially for the workpieces which have several holes and require higher accuracy of the distance of holes.

Introduction of Planer Type Milling and Boring Machining Center:
PBC110, PBC130, PBC160 series milling and boring machining centers are designed by SMTCL through adopting advanced Germany technology.
These machines have been designed in modular ways, which is to equip various CNC control on the same main machine and adopt relative adjustment on construction and layout to make various machines.
PBC series can realize auto positioning of each axis, and simultaneous movement of any four axes among X, Y, Z, W, and B. It can machine outline and 3-dimension curve by liner interpolation and arc interpolation.
As per customers' requirements, rotary table, angle milling head etc. can be equipped to enlarge machining scope.

Structure Features of Planer Type Milling and Boring Machining Center:
Feed servo motor of Y-axis
Chain wheel support and balancing chain
Ball screw and nut of Y axis
Hardness of steel inserted guideway for Y axis is HRC 60±2
65 Series
Moveable spindle .110, travel 550; .130, travel 800, travel 1000
Support of Ballscrew
68 Series
Its ram dimension is 480×480, moveable boring shaft with diameter .130/.160 and travel 700
Lubricating pump motor of spindle box
Gib with rollers is used for adjusting Y axis accuracy and pre-load
Ballscrew for spindle feed
CNC servo motor for spindle feed
Facing plate
TKP6511B.=630
TKP6513.=730
CNC Servo motor for U axis
Buttons station
Spindle box with facing plate

CNC Planer Horizontal Milling and Boring Machine
Worktable
Spindle.110: 1000×1250, 1250×1400
Spindle.130: 1400×1600, 1600×1800, 1600×2000, 1800×2000, 1800×2200, 2000×2000
Spindle.160: 1600×1800, 1800×2000, 2000×2000, 2000×2500, 2500×3000
CNC moveable rotary worktable (Hydrostatic)
Worktable 2000×2000, 2000×2500, loading 20000kg
Worktable 2500×3000, loading 30000kg
Slide of worktable
Complex guideway
Front side with pasting plastic, rolling movement on the side
Transmission
Motor, belt wheel and double worm and worm bar, pinion, gear ring, eliminated transmission clearance
Thrust bearing, worktable, rotating flexible, the load bearing is large
Clamping at vertical way
Unclamping by hydraulic, clamping by butterfly spring which with large force, without deformation.
Circle scale is used for measurement
Gear for worktable rotation is utilized to eliminate rotary clearance on the forward and backward
The gib with rollers can meet rolling without clearance, avoid snaking motion, and improve accuracy of movement and positioning Position for high precision positioning pin (For.110)
Servo motor for worktable rotation
Ballscrew seat is able to reduce thermal deformation error for pre-loaded ballscrew
Ballscrew and nuts for Z/X axis
Servo motor for Z(X) axis
Different scales is available to meet actual requirement
Hardness of steel inserted guideway is HRC60±2, the front side with pasting plastic, rolling without clearance on the side Bed
Standard accessories
Center lubricating device
Hydraulic station
Chain chip conveyor (PBC130/PBC160)
Helix chip conveyor (PBC110)
Air conditioner of electric cabinet
Accordion type (For pillar guide protection)
Circle scale
Handle pulse generator
Pneumatic components
Center lubricating device
Helix chip conveyor (PBC110)
Cooler
Air conditioner for electric cabinet
Hydraulic tank
Illuminating for working area
RS232 interface
Pneumatic tri-components
Handle pulse generator
Organ protective cover for columns
Chain chip conveyor with cooling tank
Optional accessories
Tool magazine (40 standard, 60)
Protective for working area
Cleaning squirt
Power arm
Chain chip conveyor and paper filter for spindle inner cooling system
Rolling blind is used to protect column guideway
ZTK150L CNC vertical rotary table .1500
Heidenhain system
NC facing plate
Scale
FANUC system
Larger worktable
6511: 1250×1250 1250×1400 .1600
6513/6813: 1600×1800 1600×2000 1800×2200
1800×2000 2000×2000 2000×2500
6516/6816: 2000×2500 2500×3000
CNC system (FANUC 18i, Heidenhain iTNC 530)
Cleaning squirt
NC vertical rotary worktable .1500
Removable facing plate (For TK series)
Universal milling head (TK series/index manual)
Right milling head standard/extended (TK series/index manual)
Scale for X, Y and Z axis (Standard for export)
Circle scale for B axis
Protective for working area
Protective for column and spindle box
Paper filter for spindle inner cooling system
Tool magazine (TH series) (40, 60)
00 Width of worktable/20T)
Extension of 50 spindle (250/2000 Width of worktable/10T) (400/2000 Width of worktable/20T)

A×B	C×n	D	E	F	G	H	L	Loading	Applicable lathe
1000×1250	125×6	22	37	16	45	100K6	15	5	PBC110	PBC130q
1250×1400	125×8	22	37	16	45	100K6	15	5	PBC110	PBC130q
1400×1600	160×8	22	37	16	45	100K6	15	10	PBC130	PBC160
1600×1800	160×8	22	37	16	45	100K6	15	10	PBC130	PBC160
1600×2000	160×8	22	37	16	45	100K6	15	10	PBC130	PBC160
1800×2000	200×8	22	37	16	45	100K6	15	10	PBC130	PBC160
1800×2200	200×8	28	50	21	56	100K6	15	10	PBC130	PBC160
2000×2000	200×8	28	50	21	56	100K6	15	10	PBC130
2000×2000	200×8	28	50	21	56	100K6	15	20	PBC160
2000×2500	200×8	28	50	21	56	100K6	15	20	PBC160
2500×3000	250×8	36	60	28	71	180K6	15	30	PBC160

Technical Specifications of PBC Planer Type Milling and Boring Machining Center:

Item		Units	PBC110	PBC110f	PBC130q	PBC130
Table size		mm	1000×1250 (1250×1400)	1000×1250 (1250×1400)	1000×1250 (1250×1400)	1400×1600 (1600×1800)
Max. load on the table		kg	5000	5000	5000	10000
Worktable and T slot			22×7	22×7	22×7	28×9
Dia. of spindle		mm	110	110	130	130
Taper of spindle			ISO 7:24 No50	ISO 7:24 No50	ISO 7:24 No50	ISO 7:24 No50
Speed of spindle		r/min	10-2500(10-3000)	10-2000	10-2000	10-2000(10-3000)
Max. torque		N.m	1300/1700	1300/1700	1300/1700	2500/3000
Distance between spindle center and table top		mm	60-1560(30-1530)	60-1560(30-1530)	70-1570	100-1700
Min. distance between spindle end and table		mm	350 Spindle zero position	487 Spindle zero position	487 Spindle zero position	Extension of 50 spindle (250/2000 Width of worktable/10T) (400/2000 Width of worktable/20T
Transverse travel of table X		mm	2000(2500, 3000)	2000(2500, 3000)	2000(2500, 3000)	2000(3000, 3500, 4000)
Vertical travel of headstock Y		mm	1500	1500	1500	1600(2000, 2500, 3000)
Longitudinal travel of column Z		mm	1200(2000)	1200(2000)	1200(2000)	1600(2000)
W spindle travel		mm	550	550	550	800
V travel of ram		mm	-	-	-	-
U slide travel of facing plate		mm	-	140	140	-
Rotation of rotary table B			0.001°×360°	0.001°×360°	0.001°×360°	0.001°×360°
Feed speed
X, Y, Z		mm/min	1-6000	1-6000	1-6000	1-6000
W, U		mm/min	W:1-2000	W:1-2000; U:1-1000	W:1-2000; U:1-1000	W:1-3000
B		r/min	0-2.5	0-2.5	0-2.5	0-1
Rapid speed
X, Y, Z		m/min	9	9	9	9
W, U		m/min	2.4	2.4	2.4	W:3
B		r/min	2.5	2.5	2.5	1
Tool magazine capacity(TH series)		piece	40(60 Floor type)	40(60 Floor type)	40(60 Floor type)	40(60)
Shank specification			ISO 7:24 JT50	ISO 7:24 JT50	ISO 7:24 JT50	ISO 7:24 JT50
Pin standard			LDA-50	LDA-50	LDA-50	LDA-50
Power of main motor		kW	17/22.5 (Continuous /30min	17/22.5 (Continuous /30min)	17/22.5 (Continuous /30min)	22/30
Positioning accuracy
Executing JB/T8772.4-1998 Standard	X, Y, Z	mm	X:0.025; Y,Z,W:0.020	X:0.025; Y,Z,W:0.020; U:0.045	X:0.025; Y,Z,W:0.020; U:0.045	X,Y,Z:0.026 ; W:0.020
	B(4×90°)	"	15(3.2)	15(3.2)	15(3.2)	18(4)
Executing JIS Standard	X, Y, Z	mm	X,Y,Z,W:±0.008	X,Y,Z,W:±0.008	X,Y,Z,W:±0.008	X,Y,Z,W:±0.008
	B(4×90°	"	±7.5(±2)	±7.5(±2)	±7.5(±2)	±7.5(±2)
Repeatability
Executing JB/T8772.4-1998 Standard	X, Y, Z	mm	X:0.020; Y,Z,W:0.016	X:0.020; Y,Z,W:0.016; U:0.032	X:0.020; Y,Z,W:0.016; U:0.032	X,Y,Z:0.020 ; W:0.018
	B(4×90°)	"	9(2)	9(2)	9(2)	10(2)
Executing JIS Standard	X, Y, Z	mm	X,Y,Z,W:±0.005	X,Y,Z,W:±0.005	X,Y,Z,W:±0.005	X,Y,Z,W:±0.005
Overall dimensions of machine(L×W×H)		mm	5555×4155×4200	5555×4155×4200	5555×4155×4200	6700×7800×4700
Weight of machine		kg	20000/21000	20000/21000	20000/21000	35000/39000
CNC system			SIEMENS 840D(FANUC system 18i optional)	SIEMENS 840D(FANUC system 18i optional)	SIEMENS 840D(FANUC system 18i optional)	SIEMENS 840D(FANUC system 18i optional)
Total power capacity		KVA	50	50	60	100

Item		Units	PBC130f	PBC160	PBC130r	PBC160r
Table size		mm	1400×1600 (1600×1800)	1600×1800 (2000×2500) (2500×3000)	2000×2000 (2000×2500)	2000×2000 (2000×2500) A(2500×3000)B
Max. load on the table		kg	10000	10000(20000, 30000)	10000(20000)	10000(20000)A(30000)B
Worktable and T slot			28×9	28×9	28×9	28×9
Dia. of spindle		mm	130	160	130 Square ram 480×480	160 Square ram 480×480
Taper of spindle			ISO 7:24 No50	ISO 7:24 No50	ISO 7:24 No50	ISO 7:24 No50
Speed of spindle		r/min	10-2000	10-1500	10-1500	10-1000
Max. torque		N.m	2500/3000	3500/4800	1800/2500	3000/4100
Distance between spindle center and table top		mm	100-1700	100-2100	267-2267(300-2300)	300-2300
Min. distance between spindle end and table		mm	Extension of 50 spindle (250/2000 Width of worktable/10T) (400/2000 Width of worktable/20T)	Extension of 0 spindle (100, 350)	833 Spindle zero position(1033 1173)	1033 Spindle zero position(1173,1423)
Transverse travel of table X		mm	2000(3000, 3500, 4000)	3000(3500, 4000)	2000(3000, 3500, 4000)	3000(3500, 4000)
Vertical travel of headstock Y		mm	1600(2000, 2500, 3000)	2000(2500, 3000)	1600(2000, 2500, 3000)	2000(2500, 3000)
Longitudinal travel of column Z		mm	1600(2000)	2000	1600(2000)	2000
W spindle travel		mm	800	1000	700	700
V travel of ram		mm	-	-	700	700
U slide travel of facing plate		mm	200	-	-	-
Rotation of rotary table B			0.001°×360°	0.001°×360°	0.001°×360°	0.001°×360°
Feed speed
X, Y, Z		mm/min	1-6000	1-6000	1-6000	1-6000
W, U		mm/min	1-3000	1-3000	W, U:1-3000	W, U:1-3000
B		r/min	0-1	0-1	0-1	0-1
Rapid speed
X, Y, Z		m/min	9	9	6	6
W, U		m/min	3	W:3	W, U:3	W, U:3
B		r/min	1	1	1	1
Tool magazine capacity(TH series)		piece	40(60)	40(60)	40(60)	40(60)
Shank specification			ISO 7:24 JT50	ISO 7:24 JT50	ISO 7:24 JT50	ISO 7:24 JT50
Pin standard			LDA-50	LDA-50	LDA-50	LDA-50
Power of main motor		kW	22/30	37/51	37/51	37/51
Positioning accuracy
Executing JB/T8772.4-1998 Standard	X, Y, Z	mm	X,Y,Z:0.026; W:0.020; U:0.032	X:0.030; Y,Z:0.026; W:0.020	X,Y,Z:0.026; W,V:0.025	X,Y,Z:0.026; W,V:0.025
	B(4×90°)	"	18(4)	18(4)	18(4)	18(4)
Executing JIS Standard	X, Y, Z	mm	X,Y,Z,W:±0.008	X,Y,Z,W:±0.001	X,Y,Z,W:±0.008	X,Y,Z,W:±0.008
	B(4×90°	"	±7.5(±2)	±7.5(±2)	±7.5(±2)	±7.5(±2)
Repeatability
Executing JB/T8772.4-1998 Standard	X, Y, Z	mm	X,Y,Z:0.020; W,U:0.018	X,Y,Z:0.020; W:0.018	X,Y,Z:0.018; W,V:0.015	X,Y,Z:0.018; W,V:0.015
	B(4×90°)	"	10(2)	10(2)	10(2)	10(2)
Executing JIS Standard	X, Y, Z	mm	X,Y,Z,W:±0.005	X,Y,Z,W:±0.006	X,Y,Z,W:±0.005	X,Y,Z,W:±0.005
Overall dimensions of machine(L×W×H)		mm	6700×7800×4700	7250×7250 ×5000(8000× 8000×5000)	7600×6300×5300	8200×8000×5300
Weight of machine		kg	35000/39000	38000(40000) 53000(55000) 63000(65000)	42000(44000) 59000(61000)	42000(44000) 57000(59000) 67000(69000)
CNC system			SIEMENS 840D(FANUC system 18i optional)	SIEMENS 840D(FANUC system 18i optional)	SIEMENS 840D(FANUC system 18i optional)	SIEMENS 840D(FANUC system 18i optional)
Total power capacity		KVA	100	100/130/150	100/130/150	100/130/150

SMTCL is a China milling and boring machining center manufacturer. In addition to providing high quality machining centers, we also offer superior CNC lathes and conventional lathes etc.

PBC Planer Type Milling and Boring Machining Center